13-year testing machine production organization
Improve quality with cutting-edge technology, Product testing experts around you
Company dynamics
-
022026-11
From Raw Material to Finished Frame
Most of a testing machine is decided long before the control cabinet is wired: it is decided by how the frame and the moving parts are machined. A short walk through our machining floor.Frame and columnColumn faces are milled in one set-up so that the two columns of a tensile frame stay parallel over their full travel. A column that is out of parallel by a few hundredths loads the specimen off-axis, and the resulting bending shows up as··· Learn more -
022026-11
Calibration Lab: Traceable Force Measurement
Force measurement is only as good as the chain behind it. We have upgraded the in-house calibration bench so that force readings are traceable to national standards rather than to a factory-transfer value.What changedThe bench now uses a set of Class F1 weights and a reference load cell with a certificate renewed annually. Both the reference cell and the weights carry certificates issued by a laboratory accredited under CNAS, so the unc··· Learn more -
022026-11
Inside the Assembly & Commissioning Shop
Every machine leaves our Dongguan plant only after it has been assembled, wired and actually run with a specimen on it. This is what that stage looks like.AssemblyFrames are squared and welded on the machining floor, then moved to the assembly bay where the drive system, load cell and safety interlock are fitted. Wiring follows a per-model harness drawing, so a technician can trace any conductor back to the schematic without guessing.Ru··· Learn more
