15-year testing machine production organization
Improve quality with cutting-edge technology, Product testing experts around you
Spring Tester DY-1001Z 5-50kg
- Date：2026-11-11
- Visits：1031
- Product introduction
- Related products
The DY-1001Z is a bench-top, motorised vertical tension and compression test stand with twin columns and stepless speed control. With a 5–50 kg capacity and 200 mm stroke, it measures the load, deflection and set-point force of helical springs, flat springs and small elastic elements, and also handles low-force mechanical tests on rubber, plastics, wire and composite materials.
A load cell travels on a precision lead screw driven by a speed-controlled AC motor. Force is shown on a digital or dial force gauge, and the up / stop / down panel with upper and lower limit switches stops the crosshead at a preset position, protecting the sensor and fixtures from overload.
Applications
Spring stiffness, free length, working load and permanent set are the key checks in incoming batch inspection. The operator sets the distance between the compression platens to the free height of the spring, selects test speed and stroke, then records the load at each specified deflection to plot a load–deflection curve and calculate stiffness. Compact and simple to operate, the stand suits production-line, laboratory and QC workstations; changing fixtures allows tension, compression, peel and shear tests on small finished parts.
Typical users include spring manufacturers, hardware and appliance makers, automotive suppliers, wire and cable producers, rubber and plastics processors and research institutes. Flat platens, V-platens, pull hooks, puncture and peel fixtures are available. For automatic peak detection, averaging and report export, specify the digital force gauge with data output. Loads above 50 kg, or full computer control with stress–strain curves and modulus calculation, call for the computerised universal tensile tester.
Specifications
Item Specification Model DY-1001Z Description Bench-top motorised vertical tension / compression tester (compact tensile tester) Frame Twin-column motorised vertical stand Maximum test force 5–50 kg AC speed-control motor 90 W Test stroke 200 mm Test speed 0–300 mm/min, stepless Force display resolution 0.01 N Operation Up / stop / down Stop function Limit-switch protection stop Power supply AC220V / 50 Hz Force gauge options Digital or dial (pointer) type Included accessories Power cable, hex key set, fixture set Typical specimens Springs, rubber and plastics, textiles, door and window hardware, composites, wire and cable, automotive and power-train parts Note Overall dimensions and net weight vary with frame height and force gauge; shipping documents govern Applicable standards
Standard Scope International reference GB/T 1239.2 Cold-formed cylindrical helical compression springs — technical specifications DIN 2095 GB/T 1239.1 Cold-formed cylindrical helical tension springs — technical specifications — GB/T 2611 General technical requirements for testing machines — GB/T 16825.1 Verification of static uniaxial testing machines — force calibration ISO 7500-1 JIS B2704 Helical springs — methods of test and inspection — Ordering information
Place the stand on a rigid bench or level floor in a dry room free of strong vibration and corrosive gases, and feed it from an independent AC220V/50Hz supply with protective earth. Check the limit switches and fixture tightness before each run, never exceed the rated capacity, and re-zero after every fixture change because fixture self-weight offsets the force zero. Calibrate periodically with standard weights or a reference force gauge. For larger loads see the double-column tensile tester and the universal material testing machine.
Dongguan Dongyang Machinery Co., Ltd. — manufacturer of 200+ reliability testing machines. Contact us for quotation: 13790146684 (WhatsApp/WeChat available).
